Rhubarb

Rhubarb Evonne Gong

Introduction

Rhubarb (Rheum spp.) has a long history of medicinal use in Asia. Its use as a food crop is much more recent, with widespread table use beginning in the 19th century. The leaves of the plant are toxic, but the fattened petioles are edible and consumed most commonly in pies and other sweetened desserts, in beverages, and occasionally as a vegetable. Several species of Rheum exist, and modern culinary varieties were likely derived from crosses between some combination of these species. The genus Rheum is not closely related to other vegetable crops; it belongs to the family Polygonaceae, along with buckwheat and many weeds including sorrels and knotweeds.

Rhubarb is a perennial crop that requires a dormant winter period below 40ºF to stimulate vigorous spring growth. It grows most vigorously in cool conditions, and growth is suppressed at high temperatures (>90ºF). For this reason, rhubarb is well-adapted to Northern latitudes in the U.S. and Canada. Once established, a rhubarb planting can remain productive for 8-15 years. 

Types and Varieties

Rhubarb varieties are classified as red, green, or speckled (pink). The market generally prefers red over green or speckled.

In New England, the most common variety grown is Macdonald, also known as Macdonald's Canadian Red or Macdonald Crimson. This cultivar has large stalks and a vigorous and upright-growing habit, and is resistant to wilt and root rot. It is excellent for pies, canning, and freezing. It can have medium to heavy seed stalk production. At the beginning of the harvest season (late May), the petioles may be a deep red but will lose some or all of their color as the weather warms and as harvest extends through June into early July. 

  • Red Types: Crimson (may also be called Crimson Cherry, Crimson Red, or Crimson Wine) is reportedly the only variety of consequence in Oregon and is reported to do well in New England. It produces brightly colored red stalks with the unique characteristic of being red throughout. Other vigorous red varieties include Valentine and Cherry Red.
  • Speckled/Pink Types: Victoria produces stalks that are large, of excellent quality, long, and round with smooth ribs. Stalks are light green with pink speckling that is more intense towards the bottom of the stalk. Stalks are solid green near the top. Victoria is commonly used for forcing. Strawberry is very similar to Victoria, and may be the same variety. German Wine is similar to Victoria but slightly more vigorous and more intense in color, typically with a darker pink speckling on a green stem.
  • Green Types: Riverside Giant is a cold-hardy, vigorous producer with large diameter, long, green stalks.

Soil Fertility

Plant Nutrient Recommendations According to Soil Test Results for Rhubarb

Planting Year

SOIL TEST RESULTS NITROGEN (N) - LBS PER ACRE PHOSPHOROUS (P) -
LBS P2O5 PER ACRE

POTASSIUM (K) -
LBS K2O PER ACRE

VERY LOW LOW OPTIMUM ABOVE OPTIMUM VERY LOW LOW OPTIMUM ABOVE OPTIMUM
Broadcast and incorporate before planting 150 75 50 25 0 150 100 50 0
Sidedress one month after growth starts 45 0 0 0 0 0 0 0 0

 

Established Plantings

SOIL TEST RESULTS NITROGEN (N) - LBS PER ACRE PHOSPHOROUS (P) -
LBS P2O5 PER ACRE
POTASSIUM (K) -
LBS K2O PER ACRE
Very Low Low Optimum Above Optimum Very Low Low Optimum Above Optimum
Before growth starts in spring 50 75 50 25 0 150 100 50 0
Before harvest 50 0 0 0 0 0 0 0 0
After harvest 50 0 0 0 0 0 0 0 0

Planting

The crown pieces are planted 3-6" deep, 2-3' apart, in rows about 4-6' apart or in a 4'x4' grid to allow for cross cultivation. The most common spacing in Oregon is 2'x6' although that may be tight for New England where 3'x6' (2,420 plants/acre) or 6'x6' (1210 plants/acre) spacing is used. 

Field Culture

Irrigation is usually not necessary during harvest from May to July. Maintain adequate soil moisture after the harvest season, to ensure good regrowth. Soil type does not affect the amount of total water needed, but does dictate frequency of water application. Lighter soils need more frequent water applications, but less water applied per application.

Rhubarb requires a dormancy period of temperatures below 40ºF to break dormancy and stimulate the production of leaf petioles. Winter conditions in New England easily meet this requirement. When temperatures begin to exceed 45-50ºF, crown buds begin to develop. Clear plastic row covers, applied in early February, may help achieve leaf production 10-14 days earlier. Allow sufficient slack for stalk growth. 

Harvest and Storage

Harvest may start as early as mid-May. When petioles are of sufficient size for the market, they are pulled, not cut, from the plant. For fresh market, a small amount (1/4") of leaf tissue is usually left attached to the petiole and the basal end is not trimmed. For processing, all leaf tissue is trimmed from the petiole.

Stalks should not be pulled during the first year of growth. Stalk color is best after the field is 2-3 years old. Plants should not be over-pulled at any time, as a certain amount of foliage is required for the development of the present crop as well as next year's crop. At the end of petiole harvest (late June/early July) new shoots will emerge. These will provide the reserves for the following year's crop. Yields of rhubarb depend on the number of pickings, and the age and condition of the field but should yield an average of 6 tons (600 20-lb cartons) per acre. A well-maintained field may remain productive for 15 or more years. 

Fresh rhubarb stalks in good condition can be stored 2-4 weeks at 32ºF and 95-100% relative humidity. Rhubarb can be hydrocooled or air-cooled, and the temperature of the stalks should reach 32-33ºF within 1 day of harvest. If not cooled properly, there is danger of mold growth. Moisture loss in storage will be much less if the bunched or loose stalks are packed in crates lined with perforated polyethylene film.

Disease Control

Leaf spot and stalk rot diseases can be problematic following cool, wet springs. Since both types of diseases overwinter in infected plant tissue, good sanitation practices should control most disease problems. Remove and dispose of infected plant tissue during the summer and after first frost. Improved growing conditions may help minimize disease. Fertilize plant as growth begins in the spring. Purchase disease-free plants and remove dead foliage in the fall. 

  • azoxystrobin (Quadris F): 6.0 to 15.5 lb/A; PHI 0d, REI 4h, Group 11.
  • Bacillus subtilis strain QST 713 (MinuetOG): 12.0 to 24.0 oz/A; PHI 0d, REI 4h, Group BM02.
  • chlorothalonil (Echo 721): 3.0 pt/A; PHI 30d, REI 12h, Group M05
  • copper oxychloride plus copper hydroxide (Badge X2OG): 1.0 to 2.25 lbs/A; PHI 0d, REI 48h, Group M01. Begin applications when disease first appears or when conditions favor disease.
  • cyprodinil plus fludioxonil (Switch 62.5 WDG): 11.0 to 14.0 oz/A; PHI 0d, REI 12h, Groups 9 & 12.
  • fluopyram (Velum Prime): 6.0 to 6.84 fl oz/A; PHI 0d, REI 12h, Group 7.
  • laminarin (Vacciplant): 14.0 to 22.0 fl oz/A; PHI 0d, REI 4h, Group P04.
  • Pseudomonas chlororaphis strain AFS009 (Howler EVOOG): See label for rates; PHI 0d, REI 4h, Group BM02. May be used in greenhouse. See label for application methods.
  • pydiflumetofen plus fludioxonil (Miravis Prime): 9.2 to 13.4 fl oz/A; PHI 0d, REI 12h, Group 7 & 12. Do not apply in greenhouse.
  • pyraclostrobin (Cabrio EG): 8.0 to 12.0 oz/A; PHI 7d, REI 12h, Group 11. Do not make more than 1 application before alternating to non-Group 11 fungicide.
  • thyme oil (Guarda): See label for rates; PHI 0d, REI 0h, Group NC.

Rhubarb Weed Control

Rhubarb Weed Control ashahane

NOTE: This is a list of herbicides registered for use in rhubarb in the Northeast, but that there is no specific crop safety data or efficacy data available for these products on rhubarb in our region. Always use caution when using new products until you have a sense on how they will perform in your field conditions on your crop.

Preemergent Herbicides (before weeds germinate)

  • clomazone (Command 3ME)REI 12h, Group 13. Apply 64 fl oz/A per application, only 1 application per year. Apply when rhubarb is dormant, before leaf emergence. Apply in a minimum of 10 gal/A of spray.
  • dichlobenil (Casoron 4G): REI 24h, Group 29. Apply 50 lbs/A per application, only 1 application per year. Apply when rhubarb is dormant and incorporate into the soil with water through irrigation or rainfall.
  • prometryn (Caparol 4L): PHI 40d, REI 12h or 48h, Group 5. Apply 2-4 pt/A per application, only 1 application per year. Apply when established rhubarb is dormant, before leaf emergence. Apply in a minimum of 20 gal/A of spray. Use the lower rate on sandy soils and the higher rate on silt and clay soils.
  • s-metolachlor (Dual Magnum)PHI 62d, REI 24h, Group 15. Apply 0.67-1.33 pts/A per application, only 1 application per year. Apply when rhubarb is dormant, before leaf emergence, as a broadcast spray to soil surface in early spring.
  • sulfentrazone (Aquesta 4F): REI 12h, Group 14. Apply 8 oz/A per application, only 1 application per year. Apply just before rhubarb plants break dormancy at least 80 days before harvest in a minimum of 10 gal/A of spray.

Pre- and Postemergent Herbicides

  • halosulfuron (Sandea)PHI 60d, REI 12h, Group 2. Apply 0.5-1 oz/A per application, only 1 application per year. Apply when rhubarb is dormant, as late as possible, prior to the breaking of rhubarb dormancy. Sandea may cause significant crop stunting, so begin with the lower rate to determine potential sensitivity to its use along with speed and degree of recovery. For best results use a NIS if labeled weeds are emerged. Apply in a minimum of 15 gal/A of spray.
  • linuron (Lorox DF)REI 24h or 8d, Group 5. Apply up to 3 lbs/A per application, only 1 application per year. Apply when rhubarb is dormant, before leaf emergence. Make application as a broadcast or banded over-the-row treatment. Do not use on soils with less than 1% organic matter. Preemergence can control annual weeds as they germinate. Postemergence can control up to 2” tall annual grasses and up to 6” tall broadleaf weeds.
  • mesotrione (Callisto): PHI 21d, REI 12h, Group 27. Apply up to 6 oz/A per application. Only 1 application per year. Apply when established rhubarb is dormant, before leaf emergence. Rainfall or irrigation after application may increase the risk of injury to emerging rhubarb. If weeds are emerged at the time of application it is recommended to add an adjuvant (crop oil at 1% v/v or NIS at 0.25% v/v).
  • quinclorac (QuinStar 4L): REI 12h, Group 4. Apply up to 12.6 oz/A, up to 2 applications allowed per year, a minimum of 30 days apart. Do not exceed 25.2 oz/A per year. Apply as a foliar application in a minimum of 10 gal/A of spray. A crop oil concentrate at a rate of 2 pints per acre may be included in the spray mixture, but can cause injury if used under hot and humid conditions. Do not apply to stressed crop or injury may occur.

Postemergence Herbicides (after weeds germinate)

  • carfentrazone (Aim EC)PHI 0d, REI 12h, Group 14. Apply 0.5-2 oz/A per application. Do not exceed 6.1 oz/A per season. Can be applied as a preplant burndown no later than 7 days before seeding or immediately before transplanting crops. Can also be applied to row middles of emerged crops with hooded sprayers to control emerged weeds, including crops grown on mulch or plastic. Prevent any spray from contacting the crop, or injury will occur. For best results, make application to actively growing weeds up to 4” tall and rosettes less than 3” across.
  • clethodim (Select Max)PHI 30d, REI 24h, Group 1. Apply 9-16 oz/A per application, up to 4 applications allowed per year, a minimum of 14 days apart. Do not exceed 64 oz/A per year. Apply to actively growing grasses. Add 0.25% v:v nonionic surfactant (1 qt/100 gal of spray). Can also be applied as a spot-spray by mixing 0.33-0.66% (0.44-0.85 oz/gal) Select Max and 0.25% v:v nonionic surfactant (0.33 oz/gal). Spray to wet, but do not allow runoff of spray solution.
  • fluazifop (Fusilade DX)PHI 14d, REI 12h, Group 1. Apply up to 16 oz/A per application, up to 2 applications allowed per year, a minimum of 14 days apart. Do not exceed 32 oz/A per year. Apply to actively growing grasses. Add either crop oil concentrate (0.5-1%, 0.5-1 gallon per 100 gallons of spray) or nonionic surfactant (0.25-0.5%, 1-2 qt per 100 gal of spray).
  • glyphosate (Roundup Power Max): PHI 14d, REI 4h, Group 9. Apply 10 oz to 3.1 qts/A per application, multiple applications allowed per year. Do not exceed 5 qts/A per year. Rate based on target weed species. Can be applied during fallow intervals, prior to planting or transplanting, at planting, or before crop has emerged. Could cause injury when applied prior to transplanting or direct-seeding into plastic mulch. Remove residual product from plastic mulch with a 0.5” of water through irrigation or rainfall prior to planting.
  • paraquat (Gramoxone SL 2.0*): REI 12h or 24h, Group 22. Apply 1.7-2.7 pts/A per application, up to 2 applications allowed per year, a minimum of 7 days apart. Do not exceed 5.4 pts/A per year. Apply during the dormant season before buds begin to grow. Apply in a minimum of 10 gal/A of spray. May be fatal if swallowed or inhaled. *Restricted use: Applicators must complete an EPA-approved paraquat training every 3 years: https://www.epa.gov/pesticide-worker-safety/paraquat-dichloride-training-certified-applicators.
  • pelargonic acid (Scythe): PHI 1d, REI 12h, Group 0. Apply a 3-10% solution (3-10 gal/100 gal of spray). Apply in 75-200 gal/A of spray. Can use preplant, or as a directed and shielded spray during crop growth. Avoid contact with foliage or crop damage may occur. Spray to wet, but do not allow runoff of spray solution.
  • quinclorac (Quinstar 4L): REI 12h, Group 4. Apply up to 12.6 oz/A per application, up to 2 application allowed per year, a minimum of 30 days apart. Do not exceed 25.2 oz/A per year. Apply as a foliar application. Can add a crop oil concentrate. Apply in a minimum of 10 gal/A of spray. Do not apply when crops are stressed.
  • sethoxydim (Poast)PHI 30d, REI 12h, Group 1. Apply up to 1.5 pt/A per application, multiple applications allowed per year, a minimum of 14 days apart. Do not exceed 3 pts/A per year. Apply to actively growing grasses. Use with crop oil concentrate (2 pt/A) or methylated seed oil (1.5 pt/A). Crop oil can cause injury under hot and humid conditions. Can also be applied as a spot-spray by mixing 1-1.5% (1.3-1.9 oz/gal) Poast and 1% v:v crop oil concentrate (1.3 oz/gal). Spray to wet, but do not allow runoff of spray solution.
Weed Control