NOTES: For the herbicides listed below, one product trade name and formulation is provided for each active ingredient along with preharvest interval (PHI), restricted entry interval (REI), resistance management group number, and example of rates and special instructions. In many cases, there are other products available with the same active ingredient. However, not all products with the same active ingredient are registered for use in a crop. Always check the product label to be sure that the crop is listed before using.
Stale Seedbed
See Stale Seedbed Technique in the Weed Management section for information on the use of these herbicides.
- carfentrazone (Aim EC): PHI 0d, REI 12h, Group 14.
- glyphosate (Roundup Power Max): PHI 14d, REI 4h, Group 9.
- pelargonic acid (Scythe): PHI 1d, REI 12h, Group 0.
Preemergent Herbicides (before weeds germinate)
- cycloate (Ro-Neet): REI 48h, Group 15. Apply 0.5 gal/A per application, only 1 application per year. Can be applied before, during, or immediately after planting. Apply in 10-50 gal/A of spray. Incorporate immediately 2-3” into the soil. Use on mineral soils only. Use the lower rate on sandy soils and the higher rate on silt and clay soils.
- s-metolachlor (Dual Magnum): REI 24h, Group 15. MASSACHUSETTS, MAINE, and NEW HAMPSHIRE only. Make sure the label for your state is available for download before using this product. This is a restricted label available only to growers who apply through the website www.syngenta-us.com/labels/indemnified-label-login and agree to a waiver of liability. Main target weeds for this registration are galinsoga and yellow nutsedge. All label instructions will be supplied after the application for use is completed.
Postemergent Herbicides (after weeds germinate)
- carfentrazone (Aim EC): PHI 0d, REI 12h, Group 14. Apply 0.5-2 oz/A per application. Do not exceed 6.1 oz/A per season. Can be applied as a preplant burndown no later than 7 days before seeding or immediately before transplanting crops. Can also be applied to row middles of emerged crops with hooded sprayers to control emerged weeds, including crops grown on mulch or plastic. Prevent any spray from contacting the crop, or injury will occur. For best results, make application to actively growing weeds up to 4” tall and rosettes less than 3” across.
- clethodim (Select Max): PHI 14d, REI 24h, Group 1. Apply 9-16 oz/A per application, up to 4 applications allowed per year, a minimum of 14 days apart. Do not exceed 64 oz/A per year. Apply to actively growing grasses. Add 0.25% v:v nonionic surfactant (1 qt/100 gal of spray). Can also be applied as a spot-spray by mixing 0.33-0.66% (0.44-0.85 oz/gal) Select Max and 0.25% v:v nonionic surfactant (0.33 oz/gal). Spray to wet, but do not allow runoff of spray solution.
- clopyralid (Stinger): PHI 21d, REI 12h, Group 4. Apply 4-8 oz/A per application, up to 2 applications allowed per year. Do not exceed 8 oz/A per year. Apply when spinach is in the 2- to 5-leaf stage in 10-20 gal/A of spray. Rate based on weed composition. Some leaf curling may appear, especially at high application rates. Spray additives are not recommended.
- glyphosate (Roundup Power Max): PHI 14d, REI 4h, Group 9. Apply 10 oz to 3.1 qts/A per application, multiple applications allowed per year. Do not exceed 5 qts/A per year. Rate based on target weed species. Can be applied during fallow intervals, prior to planting or transplanting, at planting, or before crop has emerged. Could cause injury when applied prior to transplanting or direct-seeding into plastic mulch. Remove residual product from plastic mulch with a 0.5” of water through irrigation or rainfall prior to planting.
- pelargonic acid (Scythe): PHI 1d, REI 12h, Group 0. Apply a 3-10% solution (3-10 gallons per 100 gallons of spray). Apply in 75-200 gal/A of spray. Can use preplant, or as a directed and shielded spray during crop growth. Avoid contact with foliage or crop damage may occur. Spray to wet, but do not allow runoff of spray solution.
- sethoxydim (Poast): PHI 15d, REI 12h, Group 1. Apply up to 1.5 pt/A per application, multiple applications allowed per year, a minimum of 14 days apart. Do not exceed 3 pts/A per year. Apply to actively growing grasses. Use with crop oil concentrate (2 pt/A) or methylated seed oil (1.5 pt/A). Note that crop oil can cause injury under hot and humid conditions. Can also be applied as a spot-spray by mixing 1-1.5% (1.3-1.9 oz/gal) Poast and 1% v:v crop oil concentrate (1.3 oz/gal). Spray to wet, but do not allow runoff of spray solution.